Konica KM 1024 LNB Printhead 42PL Print Head

$511.00


Konica KM 1024 LNB 42PL Print Head

Quantity
Out-of-Stock

  • Security policy (edit with Customer reassurance module) Security policy (edit with Customer reassurance module)
  • Delivery policy (edit with Customer reassurance module) Delivery policy (edit with Customer reassurance module)
  • Return policy (edit with Customer reassurance module) Return policy (edit with Customer reassurance module)

Konica KM1024 LNB 42PL Print Head

This print head is a robust, shear mode, piezo on-demand print head that is usable in both binary and 8 level greyscale mode, providing variable drop size and higher print quality without the use of additional print heads. It is a vast improvement over the km512 print head series, offering twice the print width and double the level of greyscale. Konica Minolta piezo on-demand inkjet heads are driven using lower voltages than other inkjet heads and the new actuator used in the KM1024 reduces power consumption even further. It has 1024 nozzles with a droplet size of 42 pico litre and a native resolution of 360 dpi. The print head is compatible with oil based and solvent inks. This print head is also known as the Konica Minolta KM1024 LNB.

This Printhead is used for white ink on Agfa printers.

To be used with: Agfa :Anapurna M2540 FB / :Anapurna M2050 / :Anapurna M1600, Allwin S16 / C8 / C12, Dilli Neo Titan FB2513-06DW

Remarks: Original

Specification:

• Technology: On-Demand Piezo Electric (Shared Wall 3 Cycle)

• Native Resolution: 360 dpi

• Cal. Droplet Size: 42 pico litre

• Max. Drops in Greyscale: 8 drops

• Tot. Amount of Nozzles: 1024 (512 nozzles per line)

• Nozzle Spacing: 70.5 microns

• Print Width: 72 mm

• Firing Frequency: 6.7 kHz

• Ink Compatibility: Oil based and Solvent Inks

• Heater: not integrated

Konica KM 1024